Problems we fix
- Key is hard to insert or turn
- Deadbolt drags or won't reach the strike
- Door won't latch, or latches only when slammed
- Loose handles and knobs
- Broken key stuck in the cylinder
- Locks damaged by a forced entry attempt
- Worn cylinders on high-traffic doors
Why locks fail
Pacific Northwest damp is hard on hardware. Doors swell in wet months, so latches and bolts stop lining up with the strike plate. Dirt and old graphite build up inside cylinders, springs wear out and screws work loose. Many of these faults are fixed with an adjustment, cleaning and lubrication, or a new strike plate.
Repair or replace?
If the lock body is sound we repair it. If parts are no longer made, the lock is low grade or it was badly damaged, replacement can cost about the same and last much longer. We tell you which, with prices for both, before starting. See lock change.
Simple maintenance tips
- Use a dry lubricant made for locks, not cooking or household oil
- Tighten handle screws once or twice a year
- Don't force a sticking key; it can snap
- Have a lock checked if the key starts to feel different
Frequently asked questions
Is it the lock or the door?
Often it's the door. If the bolt turns freely with the door open but drags when closed, the strike or the door alignment needs adjusting.
Do you repair commercial locks?
Yes, including mortise locks, exit devices and closers on commercial doors.